June 10: Reduce Retraction for TPU Printing – Flexible Filaments to Prevent Jams
If your flexible filament keeps jamming or printing inconsistently, your retraction settings might be too high.
-
-
June 9: Cool PLA Properly—Too Much Cooling Causes Brittle Layers
Introduction What are the best cooling settings for PLA? PLA is easy to print, but improper cooling can weaken layer adhesion or cause cracking in small details. Finding the right balance prevents brittle prints. Why This Matters Too much cooling hardens filament too fast, resulting in fragile parts, weak layer bonding, and surface defects. Too…
-
June 8: Manually level 3D Printer Bed Regularly—Even Auto-Leveling Benefits from Manual Checks
If your prints aren’t sticking properly or have inconsistent layers, your bed might not be level
-
June 7: Use Tree Supports for Cleaner Surface Finish on Complex Prints
Introduction Why use Use Tree Supports for Cleaner Surface Finish on Complex Prints? Printing models with overhangs and intricate details? Standard supports can be bulky and difficult to remove—tree supports offer a cleaner solution with minimal filament waste. Why This Matters Tree supports are more efficient than traditional supports, wasting less filament while creating smoother…
-
June 6: Always Check Your 3D Printer Extruder Tension for Consistent Filament Grip
Introduction A loose extruder grip can cause under-extrusion, filament grinding, and failed prints. Proper 3D printer extruder tension ensures smooth filament flow and consistent extrusion. Why This Matters If the extruder’s grip is too tight, filament may deform or grind. If too loose, it won’t feed properly, causing layer inconsistencies and poor adhesion. How to…
-
June 5: Use TPU-Specific Settings When Printing Flexible Filament
Avoid TPU printing failures with optimized slicer settings.
-
June 4: Keep a Clean 3D Printer Nozzle for Better Layer Adhesion
Improve 3D print quality by keeping the nozzle clean.
-
June 3: Best Print Speed for Better Fine Details
Get cleaner, more detailed 3D prints by lowering speed settings.
-
June 2: Dry Your Filament! Moisture Causes Brittle Prints and Stringing
Did you know that filament absorbs moisture?
-
June 1: Start with a Brim or Raft for Better First-Layer Adhesion
If your prints keep lifting off the bed, poor first-layer adhesion might be the culprit.
-
Tip of the Day – Coming Soon
Tip of the Day – starting June 1
